+ Antworten
Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 15 von 29

Thema: mesada unit - hilfe sucht - kein platz mehr - help sought - no memory remaining

  1. Top | #1
    Male
    Member
    Avatar von leeta
    My Car
    vw passat
    Radio
    mesada
    Dabei seit
    13.01.2014
    Beiträge
    15
    Bedankt
    0
    Erhielt 1x Danke für 1 Post

    Standard mesada unit - hilfe sucht - kein platz mehr - help sought - no memory remaining

    greetings all... I hope someone will help me - I will be thankful and pay a cash reward!! my mesada unit cannot save settings of navi s/w location... each time the unit is powered down, when restarted - the navi software fails to run with "navi software not found!" or similar... this is because there was igo8 installed on the sd card, but the unit always forgets this path/location and reverts to the factory path which is no longer available/installed.
    wrtools says nandflash 6.09MB completely full/used = I think this is the problem, perhaps file fragments from ipod interface filled up all the working memory.

    so - how to reset the install or free up the space there... I have tried by using the menus and working in the winCE environment but I do not really know how to solve...
    unit details: mesada
    mesada_2416 multi-platform 5.0, Windows ce 5.0, 104MB RAM, arm926EJ S3C2416 (534 Mhz), 800x480 pixels, 65536 colours

    lee (dot) tanczos (at) gmail (dot) com

  2. # ADS
    Circuit advertisement
    Dabei seit
    Always
    Beiträge
    Many


     

  3. Top | #2
    Nur Zu Besuch Avatar von BIFI
    My Car
    Skoda Octavia 1Z 1.9 TDI MJ2007
    Radio
    Joying JY-VQ125DAB RK3188 4Core (Hui Fei) MTCD
    OS-Version
    Android 7.1.2
    Dabei seit
    05.03.2010
    Ort
    Immer auf Achse
    Beiträge
    461
    Bedankt
    11
    Erhielt 143x Danke in 107 Posts

    Standard

    if u can reach the WinCe environment
    go to Controlpanel > System
    choose memory
    put the Slider from Left to right a little i would say 15MB Storage memory and the rest for Programmemory

    an other way is
    Just rename the new Navigationsoftware like the old (Folder and Exe-file)

  4. Top | #3
    Male
    Member
    Themenersteller
    Avatar von leeta
    My Car
    vw passat
    Radio
    mesada
    Dabei seit
    13.01.2014
    Beiträge
    15
    Bedankt
    0
    Erhielt 1x Danke für 1 Post

    Standard

    Hey thanks. I tried the memory change- it does not seem to work... There is a full blue bar already - makes me think all the memory is taken..
    I also tried copying and renaming the igo8.exe as rtnavi/rtnavi.exe ... I think it will work but the unit will not remember the key click=off or the nav side volume setting... :-(

    Any more solutions?

  5. Top | #4
    jetzt 7. China-Navi Avatar von strados
    My Car
    Toyota RAV4.3, Alfa Romeo Spider V6 3.0
    Radio
    Roadrover I7104TR + I7037V2, Sony, Navigon
    OS-Version
    Windows CE
    Dabei seit
    17.09.2010
    Ort
    D
    Beiträge
    11.316
    Blog-Einträge
    1
    Bedankt
    300
    Erhielt 2.452x Danke in 1.973 Posts

    Standard

    I tried the memory change- it does not seem to work... There is a full blue bar already - makes me think all the memory is taken..
    The slider should be setup to the left (!) side. The bar only shows already allocated memory.

    [Only members can see the link]
    =>> Bitte keine Supportanfragen per PN, dafür ist das Forum da !!!


  6. Top | #5
    Male
    Member
    Themenersteller
    Avatar von leeta
    My Car
    vw passat
    Radio
    mesada
    Dabei seit
    13.01.2014
    Beiträge
    15
    Bedankt
    0
    Erhielt 1x Danke für 1 Post

    Standard

    Yes ok- that's how it was. I should move further to the left? A little to the right? Haha.

    Also making a renamed copy of the exe and desired dir, did not work. There is a windows type message "program not found" or similar. I was thinking perhaps copy the whole dir contents as I'm sure the exe expects other files in the same path.

    Comparing your screen above, mine are in Chinese, and I don't know winCE at all.

    --- Update ---

    Thanks for replies so far... :-D

  7. Top | #6
    Nur Zu Besuch Avatar von BIFI
    My Car
    Skoda Octavia 1Z 1.9 TDI MJ2007
    Radio
    Joying JY-VQ125DAB RK3188 4Core (Hui Fei) MTCD
    OS-Version
    Android 7.1.2
    Dabei seit
    05.03.2010
    Ort
    Immer auf Achse
    Beiträge
    461
    Bedankt
    11
    Erhielt 143x Danke in 107 Posts

    Standard

    Ok Put the slider Back where it was

    now go to \Nandflash\$MSD$\AppConfig\

    there must be an DeviceConfig.cfg

    look for its atributes (Is it writeable?)

    if u want to reset your system rename the AppConfig-folder and build a new one

    its possible that u cant see the $MSD$ Folder inside Nandflash then you have to set it in Folder settings or use CEComander
    Angehängte Dateien Angehängte Dateien

  8. Top | #7
    Male
    Member
    Themenersteller
    Avatar von leeta
    My Car
    vw passat
    Radio
    mesada
    Dabei seit
    13.01.2014
    Beiträge
    15
    Bedankt
    0
    Erhielt 1x Danke für 1 Post

    Standard

    Ok... I think I have cecmd already and can start it by pointing the navi to it. But I don't seem to see anything meaningful inside NANDFLASH dir...
    I think I missed a pic but basically 2 subdir's both of which I cannot access. Both have names of Chinese characters of course :-(

    --- Update ---

    I'm sure I found a way before to see that $MSD$ dir...... Cannot recall today how to do that....

  9. Top | #8
    Nur Zu Besuch Avatar von BIFI
    My Car
    Skoda Octavia 1Z 1.9 TDI MJ2007
    Radio
    Joying JY-VQ125DAB RK3188 4Core (Hui Fei) MTCD
    OS-Version
    Android 7.1.2
    Dabei seit
    05.03.2010
    Ort
    Immer auf Achse
    Beiträge
    461
    Bedankt
    11
    Erhielt 143x Danke in 107 Posts

    Standard

    ok heres somehing to try for you

    Put the content of the archive to your SD

    Backup.exe - Copies a System files (settings) from NandFlash and StorageCard
    reset.exe - Removes the System files (settings) from NandFlash and StorageCard
    restore.exe - System restores files (settings) on NandFlash and StorageCard

    so first start backup.exe
    then look in the Mesada\NF folder if theres some data.

    If Yes

    Run Reset.exe
    This erases everything in \Nandflash\$MSD$\AppConfig\*.*, \Storagecard\orion*.* and \Storagecard\device.nng

    now restart your device

    if something goes wrong use restore to write back your backupfiles
    Angehängte Dateien Angehängte Dateien

  10. Top | #9
    Male
    Member
    Themenersteller
    Avatar von leeta
    My Car
    vw passat
    Radio
    mesada
    Dabei seit
    13.01.2014
    Beiträge
    15
    Bedankt
    0
    Erhielt 1x Danke für 1 Post

    Standard

    thanks I will try it. Should I use cecmd to get to ce environment, browse to sd card and double-click the files to execute? (Copy them there first) Or another way?

    --- Update ---

    some details I saw of the partitions on my device:

  11. Top | #10
    Nur Zu Besuch Avatar von BIFI
    My Car
    Skoda Octavia 1Z 1.9 TDI MJ2007
    Radio
    Joying JY-VQ125DAB RK3188 4Core (Hui Fei) MTCD
    OS-Version
    Android 7.1.2
    Dabei seit
    05.03.2010
    Ort
    Immer auf Achse
    Beiträge
    461
    Bedankt
    11
    Erhielt 143x Danke in 107 Posts

    Standard

    you can use Cecmd
    just start the backup.exe if those files are there (DeviceConfig.cfg) they will be saved on SD

    when this worked start the reset.exe

  12. Top | #11
    Male
    Member
    Themenersteller
    Avatar von leeta
    My Car
    vw passat
    Radio
    mesada
    Dabei seit
    13.01.2014
    Beiträge
    15
    Bedankt
    0
    Erhielt 1x Danke für 1 Post

    Standard mesada unit - hilfe sucht - kein platz mehr - help sought - no memory remaining

    Does backup.exe only copy useful/certain files? Then reset cleans all files away, then restore puts back the useful files?

    I worry the file fragments filling all the memory space will remain... Unless the reset clears all dir contents?
    Geändert von leeta (08.04.2014 um 00:38 Uhr)

  13. Top | #12
    Nur Zu Besuch Avatar von BIFI
    My Car
    Skoda Octavia 1Z 1.9 TDI MJ2007
    Radio
    Joying JY-VQ125DAB RK3188 4Core (Hui Fei) MTCD
    OS-Version
    Android 7.1.2
    Dabei seit
    05.03.2010
    Ort
    Immer auf Achse
    Beiträge
    461
    Bedankt
    11
    Erhielt 143x Danke in 107 Posts

    Standard

    Backup copies all files in that folder tempfiles as well.
    Restore puts also tempfiles back if available.
    but you can delete them before restoring.

    first try backup to see if the folder is accesable.

  14. Top | #13
    Male
    Member
    Themenersteller
    Avatar von leeta
    My Car
    vw passat
    Radio
    mesada
    Dabei seit
    13.01.2014
    Beiträge
    15
    Bedankt
    0
    Erhielt 1x Danke für 1 Post

    Standard

    Yes understood. I only have a sd card reader later today when I get back home after the office. Will try it...

    oh.. you didn't say exacly what "reset.exe" does? anyway. I'm going outside, I may be some time... lol

    --- Update ---

    Well I can copy something from there I think....

    So I then used reset, then restore, but then after power cycle, unit behaves the same... Forgets his navi file path, forgets his sound settings..... :-/

    --- Update ---

    I think the area is not easily accessible when running and we are needing to send some commands in via a script at boot up somehow? Or make it accessible in some way.... Thoughts?
    Geändert von leeta (08.04.2014 um 20:54 Uhr)

  15. Top | #14
    Nur Zu Besuch Avatar von BIFI
    My Car
    Skoda Octavia 1Z 1.9 TDI MJ2007
    Radio
    Joying JY-VQ125DAB RK3188 4Core (Hui Fei) MTCD
    OS-Version
    Android 7.1.2
    Dabei seit
    05.03.2010
    Ort
    Immer auf Achse
    Beiträge
    461
    Bedankt
    11
    Erhielt 143x Danke in 107 Posts

    Standard

    only use reset not restore
    what is in the Mesada\NF folder ?

    NF = nandFlash
    SC = Storagecard


    oh.. you didn't say exacly what "reset.exe" does?
    Run Reset.exe
    This erases everything in \Nandflash\$MSD$\AppConfig\*.*, \Storagecard\orion*.* and \Storagecard\device.nng

  16. Top | #15
    Male
    Member
    Themenersteller
    Avatar von leeta
    My Car
    vw passat
    Radio
    mesada
    Dabei seit
    13.01.2014
    Beiträge
    15
    Bedankt
    0
    Erhielt 1x Danke für 1 Post

    Standard


    :-D


    No mesada/nf/ dir found??

    I copied whole igo8 tree and contents into rtnavi dir... Might work... But unit still forgets navi volume level. Horrible loud keyclicks every time :-(

    --- Update ---

    The other subdir's only have one configuration file each, I think these came from the rar. So it seems the exe's did not access the nf? :-(

    --- Update ---

    Hah. Navi idea did not work. Boo :-( hehe.

+ Antworten
Seite 1 von 2 12 LetzteLetzte

Ähnliche Themen

  1. Antworten: 6
    Letzter Beitrag: 21.07.2013, 21:41
  2. kein GPS-Empfang mehr... brauche Hilfe! AUVIDIO AV601i
    Von jugglerxl im Forum Winca, Maisun & Co.
    Antworten: 0
    Letzter Beitrag: 15.05.2013, 18:55
  3. Antworten: 0
    Letzter Beitrag: 13.08.2012, 23:38
  4. As7608_v4: Nach Update Kein Ton mehr! HILFE!
    Von eatmyshorts im Forum Audiosources
    Antworten: 25
    Letzter Beitrag: 18.05.2011, 09:52
  5. Antworten: 2
    Letzter Beitrag: 12.06.2010, 21:41

Stichworte

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein

sponsored - supported by


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64