+ Antworten
Ergebnis 1 bis 11 von 11

Thema: Help plz ..Looking for update for roadrover..cruze

  1. Top | #1
    Member Avatar von mhenawy
    My Car
    cruze
    Radio
    roadrover
    Dabei seit
    09.02.2013
    Beiträge
    25
    Bedankt
    3
    Erhielt 1x Danke für 1 Post

    Standard Help plz ..Looking for update for roadrover..cruze

    Hello ,

    i have this unit , im looking for update for it. my target is to show 4lines display. my stock screen was showing 2 lines only
    i dont care if this is arabic or not as i dont use arabic anyway

    [Only members can see the link][Only members can see the link][Only members can see the link]

    So where to start ? what do i need to do ? i think what i need is MCU update
    back in 2011 when i installed it it was showing 4 lines information but some buttons were not working , menu,back..etc so the tech changed the MCU i think to make it show only this info in the pic

    P.S. I put the cruze logo as i had a lot of empty space

    Thanks for your help

  2. # ADS
    Circuit advertisement
    Dabei seit
    Always
    Beiträge
    Many


     

  3. Top | #2
    jetzt 7. China-Navi Avatar von strados
    My Car
    Toyota RAV4.3, Alfa Romeo Spider V6 3.0
    Radio
    Roadrover I7104TR + I7037V2, Sony, Navigon
    OS-Version
    Windows CE
    Dabei seit
    17.09.2010
    Ort
    D
    Beiträge
    11.318
    Blog-Einträge
    1
    Bedankt
    300
    Erhielt 2.452x Danke in 1.973 Posts

    Standard

    i think what i need is MCU update
    back in 2011 when i installed it it was showing 4 lines information
    Don't touch MCU ! No screen depends on MCU. MCU only is responsible for all hardware (keys, display, knobs, radio, amplifier etc. ) All screens are controlled by GUI software. Look at top right corner of main screen (your 1st picture). Which version is visible ?
    =>> Bitte keine Supportanfragen per PN, dafür ist das Forum da !!!


  4. Top | #3
    Member
    Themenersteller
    Avatar von mhenawy
    My Car
    cruze
    Radio
    roadrover
    Dabei seit
    09.02.2013
    Beiträge
    25
    Bedankt
    3
    Erhielt 1x Danke für 1 Post

    Standard

    Don't touch MCU ! No screen depends on MCU. MCU only is responsible for all hardware (keys, display, knobs, radio, amplifier etc. ) All screens are controlled by GUI software. Look at top right corner of main screen (your 1st picture). Which version is visible ?
    Thanks , the current one i run now is 1.42 the one i show
    my main target is to have the 4 lines display type on the roadrover screen instead of my 2 lines display so that it will show same cruze menu and interface

    can this be done ?
    i want it to look like this one when showing radio, time,temp..etc

    [Only members can see the link]

  5. Top | #4
    jetzt 7. China-Navi Avatar von strados
    My Car
    Toyota RAV4.3, Alfa Romeo Spider V6 3.0
    Radio
    Roadrover I7104TR + I7037V2, Sony, Navigon
    OS-Version
    Windows CE
    Dabei seit
    17.09.2010
    Ort
    D
    Beiträge
    11.318
    Blog-Einträge
    1
    Bedankt
    300
    Erhielt 2.452x Danke in 1.973 Posts

    Standard

    Thanks , the current one i run now is 1.42 the one i show
    Not MCU version, but Shell (GUI) version ! This is visible very small and pale at right top corner of main screen (that one you postet at last)
    =>> Bitte keine Supportanfragen per PN, dafür ist das Forum da !!!


  6. Folgende Benutzer bedankten sich bei strados:


  7. Top | #5
    Member
    Themenersteller
    Avatar von mhenawy
    My Car
    cruze
    Radio
    roadrover
    Dabei seit
    09.02.2013
    Beiträge
    25
    Bedankt
    3
    Erhielt 1x Danke für 1 Post

    Standard

    i think i have 1.25/26 dont know . the question for me is can i make it showing information in 4 lines or it will always be 2 lines as my original stock is 2 lines ?

    --- Update ---

    Ok i put my files in the emulator GUI is v1.25.7

  8. Top | #6
    jetzt 7. China-Navi Avatar von strados
    My Car
    Toyota RAV4.3, Alfa Romeo Spider V6 3.0
    Radio
    Roadrover I7104TR + I7037V2, Sony, Navigon
    OS-Version
    Windows CE
    Dabei seit
    17.09.2010
    Ort
    D
    Beiträge
    11.318
    Blog-Einträge
    1
    Bedankt
    300
    Erhielt 2.452x Danke in 1.973 Posts

    Standard

    Ok i put my files in the emulator GUI is v1.25.7
    I don't know which special Opel / Chevrolet version can show 4 lines. Please test it yourself. You can replace your folder D2280 by any other V1.xx Version you find here at Downloads / Roadrover.
    But rename file manager.exe (in the new folder D2280) to any name you want BEFORE copy this new folter into "StaticStore".
    If no "Manager.exe" can be found on boot, the unit will start up into Windows every time.
    That's VERY important.
    If something would be wrong with the new software, you will be able to replace the folder again. Otherwise the unit would stuck on boot and you can do nothing.
    =>> Bitte keine Supportanfragen per PN, dafür ist das Forum da !!!


  9. Top | #7
    Member
    Themenersteller
    Avatar von mhenawy
    My Car
    cruze
    Radio
    roadrover
    Dabei seit
    09.02.2013
    Beiträge
    25
    Bedankt
    3
    Erhielt 1x Danke für 1 Post

    Standard

    I don't know which special Opel / Chevrolet version can show 4 lines. Please test it yourself. You can replace your folder D2280 by any other V1.xx Version you find here at Downloads / Roadrover.
    But rename file manager.exe (in the new folder D2280) to any name you want BEFORE copy this new folter into "StaticStore".
    If no "Manager.exe" can be found on boot, the unit will start up into Windows every time.
    That's VERY important.
    If something would be wrong with the new software, you will be able to replace the folder again. Otherwise the unit would stuck on boot and you can do nothing.
    Thanks , my question is mainly , showing 4 lines has somthing to do with MCU or its matter of just GUI ?
    I dont think its the GUI as the info comes out excatly like the original screen
    when i 1st had this unit it was showing 4 lines but the controls didnt work so the tech put another software which made it show just the 2 lines and i got back the controls working...so did they overcome this issue or not ? and is my MCU 1.42 is the latest and how to make sure ??

  10. Top | #8
    jetzt 7. China-Navi Avatar von strados
    My Car
    Toyota RAV4.3, Alfa Romeo Spider V6 3.0
    Radio
    Roadrover I7104TR + I7037V2, Sony, Navigon
    OS-Version
    Windows CE
    Dabei seit
    17.09.2010
    Ort
    D
    Beiträge
    11.318
    Blog-Einträge
    1
    Bedankt
    300
    Erhielt 2.452x Danke in 1.973 Posts

    Standard

    showing 4 lines has somthing to do with MCU or its matter of just GUI ?
    This depends of which information should be displayed on line 3 and 4 (I don't know). If these are informations of the car i.e. outside temperature or something else, your are right cause these date comes via MCU to GUI.

    and is my MCU 1.42 the latest and how to make sure ??
    Sorry, I don't know. These units with old i8 GUI (folder D2280) are obsolete since about middle of 2012. There are no further updates since that time.
    And: Every MCU is special only for ONE model (car). So every model has it's own MCU versions. Your actual MCU V1.42 is not comparable with MCU versions of any other models.
    GUI Versions are universal. Every GUI can be used on every model. Only exception are models which show spefic date of the car on main screen. Of this species I know Opel, Chevrolet, Honda, Citroen, and maybe others.
    =>> Bitte keine Supportanfragen per PN, dafür ist das Forum da !!!


  11. Top | #9
    Member
    Themenersteller
    Avatar von mhenawy
    My Car
    cruze
    Radio
    roadrover
    Dabei seit
    09.02.2013
    Beiträge
    25
    Bedankt
    3
    Erhielt 1x Danke für 1 Post

    Standard

    This depends of which information should be displayed on line 3 and 4 (I don't know). If these are informations of the car i.e. outside temperature or something else, your are right cause these date comes via MCU to GUI.



    Sorry, I don't know. These units with old i8 GUI (folder D2280) are obsolete since about middle of 2012. There are no further updates since that time.
    And: Every MCU is special only for ONE model (car). So every model has it's own MCU versions. Your actual MCU V1.42 is not comparable with MCU versions of any other models.
    GUI Versions are universal. Every GUI can be used on every model. Only exception are models which show spefic date of the car on main screen. Of this species I know Opel, Chevrolet, Honda, Citroen, and maybe others.
    Thanks for your feedback . my car is cruze 2011 Model .. couldnt find anything beyond 1.42
    so the final question can the old MCU work for i9 if i put the i9 GUI in my unit ? if i put wrong MCU can i still recover it and fall back to my working MCU ?

  12. Top | #10
    jetzt 7. China-Navi Avatar von strados
    My Car
    Toyota RAV4.3, Alfa Romeo Spider V6 3.0
    Radio
    Roadrover I7104TR + I7037V2, Sony, Navigon
    OS-Version
    Windows CE
    Dabei seit
    17.09.2010
    Ort
    D
    Beiträge
    11.318
    Blog-Einträge
    1
    Bedankt
    300
    Erhielt 2.452x Danke in 1.973 Posts

    Standard

    - can the old MCU work for i9 if i put the i9 GUI in my unit ?
    No. To change over from D2280 to i9 GUI a special adapted MCU is neccessary. But this was never released for your unit.

    - if i put wrong MCU can i still recover it and fall back to my working MCU ?
    Yes, if you have your current working MCU as update file !
    =>> Bitte keine Supportanfragen per PN, dafür ist das Forum da !!!


  13. Top | #11
    Member
    Themenersteller
    Avatar von mhenawy
    My Car
    cruze
    Radio
    roadrover
    Dabei seit
    09.02.2013
    Beiträge
    25
    Bedankt
    3
    Erhielt 1x Danke für 1 Post

    Standard


    No. To change over from D2280 to i9 GUI a special adapted MCU is neccessary. But this was never released for your unit.



    Yes, if you have your current working MCU as update file !
    Thanks Strados . i understand now
    i will try to put the MCU for 2014 cruze and see if that will work with i9 GUI on my unit or not

+ Antworten

Ähnliche Themen

  1. Chevrolet How to update this unit (cruze Cyclone!)
    Von holyland im Forum We speak english
    Antworten: 3
    Letzter Beitrag: 09.02.2015, 22:50
  2. Chevrolet Cruze: Firmware Update NavGO NGD-715N
    Von FPBoy im Forum FIRMWARE Files - Device Updates
    Antworten: 3
    Letzter Beitrag: 26.09.2014, 10:29
  3. Chevrolet Chevrolet Cruze Stationcar with roadrover C8049CC
    Von Mr_Thellefsen im Forum We speak english
    Antworten: 16
    Letzter Beitrag: 19.12.2013, 20:12
  4. Roadrover - cruze - clock settings ?
    Von mhenawy im Forum We speak english
    Antworten: 1
    Letzter Beitrag: 10.02.2013, 16:17
  5. chevrolet cruze roadrover problem
    Von cengizhan im Forum We speak english
    Antworten: 2
    Letzter Beitrag: 24.01.2013, 15:40

Stichworte

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein

sponsored - supported by


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64