+ Antworten
Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 15 von 21

Thema: 2008 Mazda CX-7 w/ (I think) a Roadrover CX-7 Installed - Update Help Please

  1. Top | #1
    Kann kein Chinesisch Avatar von maxpower9900
    My Car
    2008 Mazda CX-7
    Radio
    Roadrover C7027C7
    Dabei seit
    06.01.2013
    Beiträge
    1
    Bedankt
    0
    Erhielt 0x Danke in 0 Posts

    Lächeln 2008 Mazda CX-7 w/ (I think) a Roadrover CX-7 Installed - Update Help Please

    Hi all - Recently purchased a 2008 Mazda CX-7 w/ what I believe to be a Roadrover CX-7 installed by the previous owner. I'm completely new to these after-market navigation systems. My O/S says it is "EN-PRIMA-ARM-SLC-v1.35" - the GUI shows "V1.22.7M" in the top-right corner of the main menu. MCU shows "8.05CXB6H9IN8R". Can someone please explain in detail what I need and how I go about updating the system? From what I've found 1.35 is a much older O/S. As a new user, is there anything else I should know and/or do to the system? Any tips/tricks for the best experience? Thank you so much in advance for any help.
    Geändert von maxpower9900 (06.01.2013 um 19:43 Uhr) Grund: Added MCU Info

  2. # ADS
    Circuit advertisement
    Dabei seit
    Always
    Beiträge
    Many


     

  3. Top | #2
    jetzt 7. China-Navi Avatar von strados
    My Car
    Toyota RAV4.3, Alfa Romeo Spider V6 3.0
    Radio
    Roadrover I7104TR + I7037V2, Sony, Navigon
    OS-Version
    Windows CE
    Dabei seit
    17.09.2010
    Ort
    D
    Beiträge
    11.318
    Blog-Einträge
    1
    Bedankt
    300
    Erhielt 2.452x Danke in 1.973 Posts

    Standard

    As already suggested via PN, OS should be updated to V1.53.
    [Only members can see the link]

    For any further action you need to enter Windows Desktop. Copy this tool into root of your SD Card (with gps software which always remains in the head unit).
    [Only members can see the link]

    GUI can be changed by simple replacing the complete folder D2280. But be careful and create a backup (copy) on USB-stick of complete device "StaticStore" and "NAND FLASH" before performing any changes. Before D2280 can be deleted or overwritten some fonts must be unloaded.
    - rename Manager.exe to Managerxxx.exe
    - power off / on the unit
    - the unit will boot direct into Windows Desktop

    Now any changes / replace / deletes can be done.

    To prevent a hangup with any new unknown GUI version: Also rename Manager.exe to Managerxxx.exe in the D2280 folder of the new version before copying it onto the unit. Test this version by manually start by doubleclick on Managerxxx.exe. If any problems occur, simple power off/on will force the unit to boot into Windows desktop and you can replace the corrupt version by previous one.

  4. Top | #3
    Male
    Member
    Avatar von aj75
    My Car
    Mazda CX-7 2010r.
    Radio
    Roadrover C7027C7
    Dabei seit
    18.08.2015
    Ort
    Krakow
    Beiträge
    16
    Bedankt
    1
    Erhielt 0x Danke in 0 Posts

    Standard

    Hi. Is it possible to change radio applications so as to have the AF function?
    EN-PRIMA-ARM-SLC-v1.34
    Geändert von aj75 (18.08.2015 um 22:54 Uhr)

  5. Top | #4
    jetzt 7. China-Navi Avatar von strados
    My Car
    Toyota RAV4.3, Alfa Romeo Spider V6 3.0
    Radio
    Roadrover I7104TR + I7037V2, Sony, Navigon
    OS-Version
    Windows CE
    Dabei seit
    17.09.2010
    Ort
    D
    Beiträge
    11.318
    Blog-Einträge
    1
    Bedankt
    300
    Erhielt 2.452x Danke in 1.973 Posts

    Standard

    Is it possible to change radio applications so as to have the AF function?
    Which GUI is running on your unit ?
    Please post a pic of main menu
    =>> Bitte keine Supportanfragen per PN, dafür ist das Forum da !!!


  6. Top | #5
    Male
    Member
    Avatar von aj75
    My Car
    Mazda CX-7 2010r.
    Radio
    Roadrover C7027C7
    Dabei seit
    18.08.2015
    Ort
    Krakow
    Beiträge
    16
    Bedankt
    1
    Erhielt 0x Danke in 0 Posts

    Standard

    No GUI ver. in main menu




  7. Top | #6
    jetzt 7. China-Navi Avatar von strados
    My Car
    Toyota RAV4.3, Alfa Romeo Spider V6 3.0
    Radio
    Roadrover I7104TR + I7037V2, Sony, Navigon
    OS-Version
    Windows CE
    Dabei seit
    17.09.2010
    Ort
    D
    Beiträge
    11.318
    Blog-Einträge
    1
    Bedankt
    300
    Erhielt 2.452x Danke in 1.973 Posts

    Standard

    No GUI ver. in main menu
    Sure ! in top right corner. It's very pale, maybe you have to look from different sides.
    =>> Bitte keine Supportanfragen per PN, dafür ist das Forum da !!!


  8. Top | #7
    Male
    Member
    Avatar von aj75
    My Car
    Mazda CX-7 2010r.
    Radio
    Roadrover C7027C7
    Dabei seit
    18.08.2015
    Ort
    Krakow
    Beiträge
    16
    Bedankt
    1
    Erhielt 0x Danke in 0 Posts

    Standard

    Yes Im sure. I look from different sides and different backlight. Is not there.

  9. Top | #8
    jetzt 7. China-Navi Avatar von strados
    My Car
    Toyota RAV4.3, Alfa Romeo Spider V6 3.0
    Radio
    Roadrover I7104TR + I7037V2, Sony, Navigon
    OS-Version
    Windows CE
    Dabei seit
    17.09.2010
    Ort
    D
    Beiträge
    11.318
    Blog-Einträge
    1
    Bedankt
    300
    Erhielt 2.452x Danke in 1.973 Posts

    Standard

    Is not there.
    It must be there. But nevertheless you can replace the GUI by version V1.28. It's the last of old D2280 GUI.

    - get this tool, unpack and copy it into root of your SD card
    [Only members can see the link]

    - go to screen Options / System and click button "Update" (the GUI will be terminated and Windows Desktop is visible,
    After that perform all steps of this "Update manual"
    [Only members can see the link]

    here you get GUI V1.28
    [Only members can see the link]

    - power off / on the unit,
    - the new GUI will be visible.

    Done
    =>> Bitte keine Supportanfragen per PN, dafür ist das Forum da !!!


  10. Folgende Benutzer bedankten sich bei strados:


  11. Top | #9
    Male
    Member
    Avatar von aj75
    My Car
    Mazda CX-7 2010r.
    Radio
    Roadrover C7027C7
    Dabei seit
    18.08.2015
    Ort
    Krakow
    Beiträge
    16
    Bedankt
    1
    Erhielt 0x Danke in 0 Posts

    Standard

    Should I make the OS update to version 1.55 ? If so, which version can I upload , please link because I found only "EN - PRIMA - 128MB - V1.55_with_Format" Can I make MCU update? Now I can not handle phone with steering wheel.
    In GUI 1.28 is Ford logo. Can I change it? Main menu looks the same in my Mazda (old main menu).
    Geändert von aj75 (20.08.2015 um 09:34 Uhr)

  12. Top | #10
    jetzt 7. China-Navi Avatar von strados
    My Car
    Toyota RAV4.3, Alfa Romeo Spider V6 3.0
    Radio
    Roadrover I7104TR + I7037V2, Sony, Navigon
    OS-Version
    Windows CE
    Dabei seit
    17.09.2010
    Ort
    D
    Beiträge
    11.318
    Blog-Einträge
    1
    Bedankt
    300
    Erhielt 2.452x Danke in 1.973 Posts

    Standard

    - Should I make the OS update to version 1.55 ?
    - If so, which version can I upload , please link because I found only "EN - PRIMA - 128MB - V1.55_with_Format"
    - Can I make MCU update? Now I can not handle phone with steering wheel.
    - In GUI 1.28 is Ford logo. Can I change it?
    - You can update to OS V1.55 but don't need to do it (you would notice no difference)
    ATTENTION: OS V1.55 must format complete flash and all folders in StaticStore + NAND FLASH will be gone !
    If you want to update OS, take V1.53

    - never try to update MCU ! Each version is special for ONE model !

    - no problem. Here are the skins for Mazda. Just replace them.

    [Only members can see the link]
    Geändert von strados (20.08.2015 um 10:21 Uhr)
    =>> Bitte keine Supportanfragen per PN, dafür ist das Forum da !!!


  13. Top | #11
    Male
    Member
    Avatar von aj75
    My Car
    Mazda CX-7 2010r.
    Radio
    Roadrover C7027C7
    Dabei seit
    18.08.2015
    Ort
    Krakow
    Beiträge
    16
    Bedankt
    1
    Erhielt 0x Danke in 0 Posts

    Standard

    Ive loaded GUI 1.28 and I have two problems :1. The clock itself switches to 1 hour back.
    2. Radio application displays the SA but does not function.
    I can do something to improve the radio reception ?

  14. Top | #12
    jetzt 7. China-Navi Avatar von strados
    My Car
    Toyota RAV4.3, Alfa Romeo Spider V6 3.0
    Radio
    Roadrover I7104TR + I7037V2, Sony, Navigon
    OS-Version
    Windows CE
    Dabei seit
    17.09.2010
    Ort
    D
    Beiträge
    11.318
    Blog-Einträge
    1
    Bedankt
    300
    Erhielt 2.452x Danke in 1.973 Posts

    Standard

    [quote=aj75;104027]Ive loaded GUI 1.28 and I have two problems :
    1. The clock itself switches to 1 hour back.
    2. Radio application displays the SA but does not function.
    3. I can do something to improve the radio reception ? [/quote]

    Cause we have Daylight Saving Time now, you must setup "time zone" on screen Options / Date, Time to GMT+2.
    What do you except from AF ? (BTW, it must be activated). AF only switches to another frequence, if the current is bad and another is much better.
    Did you already check, it the amplifier of the car's antenna is working well (+12V can be messured direct at the antenna harness)?
    =>> Bitte keine Supportanfragen per PN, dafür ist das Forum da !!!


  15. Top | #13
    Male
    Member
    Avatar von aj75
    My Car
    Mazda CX-7 2010r.
    Radio
    Roadrover C7027C7
    Dabei seit
    18.08.2015
    Ort
    Krakow
    Beiträge
    16
    Bedankt
    1
    Erhielt 0x Danke in 0 Posts

    Standard

    I know how it should operate AF and how to turn it on
    For me not looking and not switch to a stronger signal.
    Did you already check, it the amplifier of the car's antenna is working well (+12V can be messured direct at the antenna harness)?
    I not checked


  16. Top | #14
    jetzt 7. China-Navi Avatar von strados
    My Car
    Toyota RAV4.3, Alfa Romeo Spider V6 3.0
    Radio
    Roadrover I7104TR + I7037V2, Sony, Navigon
    OS-Version
    Windows CE
    Dabei seit
    17.09.2010
    Ort
    D
    Beiträge
    11.318
    Blog-Einträge
    1
    Bedankt
    300
    Erhielt 2.452x Danke in 1.973 Posts

    Standard

    I not checked
    Then do it.
    I would not be surprised if your antenna is not working due to missing power supply
    =>> Bitte keine Supportanfragen per PN, dafür ist das Forum da !!!


  17. Top | #15
    Male
    Member
    Avatar von aj75
    My Car
    Mazda CX-7 2010r.
    Radio
    Roadrover C7027C7
    Dabei seit
    18.08.2015
    Ort
    Krakow
    Beiträge
    16
    Bedankt
    1
    Erhielt 0x Danke in 0 Posts

    Standard


    Then do it.
    I would not be surprised if your antenna is not working due to missing power supply
    Antenna is OK. Where should I look for newer mcu?I would like to make updates to i9.

+ Antworten
Seite 1 von 2 12 LetzteLetzte

Ähnliche Themen

  1. Mazda Any OS or MCU Update for C7007-M6 (2009 Mazda 6)
    Von JMMR im Forum We speak english
    Antworten: 8
    Letzter Beitrag: 10.09.2015, 23:45
  2. Roadrover C8008HS im Honda Accord 2008
    Von d1dd1 im Forum RoadRover Berichte und Erfahrungen
    Antworten: 70
    Letzter Beitrag: 05.04.2015, 16:55
  3. China-RNS Firmware Update Caska CA3640G / DSS NAV-CX7 für Mazda CX-7
    Von Kanecaine im Forum FIRMWARE Files - Device Updates
    Antworten: 4
    Letzter Beitrag: 09.01.2014, 08:17
  4. Mazda Help!!!MCU for Intro CHR 4610(RR7007 Platform i9) Mazda 6 new 2008
    Von sahoks im Forum We speak english
    Antworten: 6
    Letzter Beitrag: 10.10.2012, 11:18
  5. Need some advices on my newly installed system - FeDom 2271VS
    Von Karaya im Forum FIRMWARE Files - Device Updates
    Antworten: 2
    Letzter Beitrag: 07.09.2012, 16:48

Stichworte

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein

sponsored - supported by


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64